Label Applicators LabelOn™ (2024)

LabelOn™ Automatic Label Applicators

The importance of a label applicator machine for bottles cannot be overstated. The increase in demand for a product means a necessary increase in the product’s production — a fact that could overwhelm the production line if it is ill-prepared. A significant part of this process is the labeling of the commodities. A good label applicator machine can speed up production without compromising precision. With LabelOn™ ‘s lineup of Label Applicators, the ever-increasing demand for your production can be met, thanks to the impressive reliability of our labeling machines.

Label Applicator Machine for Bottles

When it comes to these label applicators for bottles, it only makes sense to use a machine capable of speed, efficiency, and accuracy. This accuracy stems from the label applicator machine’s core components and how they correlate with one another. From label feeding to product control, to product sensing and label control, once these factors are in tune with one another, then the label application process will be a success time and time again.

The LabelOn™ Label Applicator for bottles uses five-phase stepping motors to give the best combination of smooth label feed and high-resolution label-positioning control. Other label application machines only have two-phase motors; with their old design, it is no wonder that these equipment gets very hot and very noisy. They also have far fewer stop positions as they turn to dispense a label.

One of the primary hurdles that label applicators must surpass is variation in label placement. In the case of our label application machine, this variation is due to the variation in the products to be labelled themselves. Our machine can recognize these product variations easily because LabelOn™ ‘s label applicators are built to deal with instances like these with efficiency.

LabelOn™ Modular Label Applicators

We have labeler machines of a modular type and can cater to a wide array of product shapes and sizes. When dealing with flat or oval bottles, the label applicator employs an Overhead Hold-Down Conveyor that goes beyond the design of most other equipment. This conveyor synchronizes with the main conveyor as well as the five-phase motors in the initial label feeding phase. The overhead conveyor itself is motor-driven and allows for accurate speed control with smooth, quiet, and cool operation.

Label Applicators LabelOn™ (1)

The conveyor also has multiple independent spring-loaded plates positioned behind its belt. This allows for greater bottle or height variation of the products which pass through the label applicator machine for bottles. Without this important feature, even one slightly taller bottle on the conveyor belt could mean a reduction of the hold-down pressure needed by the bottle next to it. This could invariably affect the label accuracy of the succeeding bottle as pressure sensitivity is critical for smooth automatic label application when the label meets the container at the controlled and synchronized speed of the conveyor belt.

This other aspect that LabelOn™ ‘s label applicator for jarsdelivers is its ability to adapt as the conveyor belts adjust their speeds. The labeling machine exhibits fine control over the speed by which the products are labeled—an important feature, especially for oval-sided bottle applications or high-angled surfaces. This is also especially important in conditions wherein bubbles of air tend to get trapped under the label and a wiper solution needs to be applied to dispel the bubbles. In most cases, the machine’s label feed is set to the optimum default ratio and speed, but you always have the option to exude control over the label application when needed.

The LabelOn™ Labeling Systems

TheLabelOn™ Label Applicator is a self-adhesive labeling machine that brings together experiences from around the world. The designers for LaberlOn™ have placed self-adhesive labeling equipment in facilities around the globe.

Easy Label Applicator Machine Set-Up

The ease of setting up the LabelOn™ label applicator machine is not an afterthought – it is a design target. With the LabelOn™ Modular Labeling machine the label applicator can be configured to cater to one or two labels onto a round bottle or onto a flat bottle or onto a LabelOn™ or an oval sided bottle. There is no point to have this versatility unless it is quick and easy to change versatility. The LabelOn™ labeler machine achieves fast and easy product changes with an insightful and efficient machine design. Other labeler machines can take hours to change from one size to another whereas the LabelOn™ Modular can safely boast that it takes minutes to change from one job to a totally different shape and size label application.

Easy Labeling Machine Service

The ease of servicing a LabelOn™ Modular label machine is also a design target. None of the electronics is “hard-wired” in place, all of the electronics are clearly labeled, modular, and can be removed with minimal tools using normal or even large-sized hands (not tiny hands on the end of impossibly thin arms).

The support of the LabelOn™ Modular label applicator is something that can be achieved from around the world or next door thanks to the records kept on each machine. Prior to manufacturing, any updates are added to three-dimensional records which can be recalled in moments by our team.

Our records enable problems initially relayed over the phone to be quickly narrowed down to an area of the label applicator machine where the assembly components of that area can be individually or collectively manipulated on a screen to pinpoint parts or adjustments that are needed to get the most out of your machine and its accuracy.

Our Complete Range

Get a Quick Quote

Label Applicators LabelOn™ (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Margart Wisoky

Last Updated:

Views: 5806

Rating: 4.8 / 5 (58 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Margart Wisoky

Birthday: 1993-05-13

Address: 2113 Abernathy Knoll, New Tamerafurt, CT 66893-2169

Phone: +25815234346805

Job: Central Developer

Hobby: Machining, Pottery, Rafting, Cosplaying, Jogging, Taekwondo, Scouting

Introduction: My name is Margart Wisoky, I am a gorgeous, shiny, successful, beautiful, adventurous, excited, pleasant person who loves writing and wants to share my knowledge and understanding with you.